|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency










3000W | |||||||
Model | RSP-3000-24 | RSP-3000-36 | RSP-3000-48 | RSP-3000-60 | RSP-3000-72 | RSP-3000-110 | |
AC INPUT 220V | DC Output Voltage | 24V | 36V | 48V | 60V | 72V | 110V |
Rated Output Current | 166.6A | 111A | 83.3A | 66.6A | 41.6A | 27.3A | |
Rated Output Power | 3000W | 3000W | 3000W | 3000W | 3000W | 3000W | |
AC INPUT 110V | DC Output Voltage | 24V | 36V | 48V | 60V | 72V | 110V |
Rated Output Current | 91.7A | 61.1A | 45.8A | 36.7A | 30.6A | 20A | |
Rated Output Power | 2200W | 2200W | 2200W | 2200W | 2200W | 2200W | |
Efficiency (at full load) | 89% | 91% | 91% | 92% | 92% | 93% | |
Voltage regulation range | 17-25V | 25-36.5V | 33-48.5V | 41-60.5V | 50-73V | 74-110V | |
Tip: When the output voltage is lowered, the maximum output current remains unchanged, but the output power decreases (power=voltage * current) | |||||||
Equipped with active PFC power factor correction function | |||||||
Input voltage | AC 100-265V, 47-63HZ | ||||||
AC Input current | AC220V /40A,AC 110V/23A(full load) | ||||||
Power factor (PF value) | PF value ≥ 0.98/110VAC (at 100% full load) | ||||||
Input Undervoltage Protection | When the AC input voltage is lower than 178V±1%, the power supply limited current, output limited at 2200W When the AC input voltage is lower than 99V±1%, the power supply limited current, output limited at 2000W When the AC input voltage is lower than 80V±1%, the power supply shurt down | ||||||
Fan shutdown protection | Either one of the two cooling fans is not running or the fan is not detected, the power supply has no output voltage, and it does not turn on | ||||||
over load protection | The overload protection mode is constant current limiting mode, which locks the output current value and prevents it from increasing. The output voltage decreases as the load increases | ||||||
Overheat protection | When the internal temperature of the power supply is too high, the overheat protection is activated, the output voltage is turned off, and after the temperature drops, it automatically recovers | ||||||



