60W UPS Uninterruptible Switching Power Supply No Switch Time AC to DC 13.8V 1A 27.6V 0.7A Psc-60-12 Psc-60-24

• Customization: Available
• Output Type: Single
• Warranty: 1 Year
• Model NO.: PSC-60
• Output Power: 51 - 100W
• Input Voltage: Full Range
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: No
• Power Supplying System: No
• Energy Transmission: No
• Modulation System: No
• Certification: CE, RoHS, FCC, Kc,Ukca
• Brand: Zjivnv
• Output Voltage: 13.8V 27.6V
• Charge Voltage: 13.8V 27.6V
• Feature: UPS Function
• Applicable Battery: Lead-Acid Battery
• Multiple Protections: Overvoltage/Overload/Over-Temperature/Overcurrent/
• Size: 129*30*97mm
• Transport Package: Box
• Specification: 1PC
• Trademark: ZJIVNV
• Origin: China
• HS Code: 8504401990
• Production Capacity: 50000PCS/Year

Product Description

Product Description

Feature

‌1.Externally Accessible Fuse‌
The externally accessible fuse design separates the fuse from the internal structure of the power supply, enabling direct replacement without disassembling the housing.

‌2.NO Switch Time
Compared to legacy models with a 0.03-second switching delay, ‌the new series achieves instantaneous switching‌, enhancing power conversion efficiency and stability.

‌3.Reverse Polarity Protection‌
Equipped with reverse polarity protection, ‌the power supply remains undamaged even if batteries are connected incorrectly‌, significantly improving operational safety

4.How to do cold start?

Connect the negative terminal of the battery and the negative terminal of the load

Need to connect it with another cable, connect it for a moment and it will switch, then remove the cable.

Specification

	Model	PSC-60-12		PSC-60-24
Output	DC output voltage	CH1:13.8V	CH2:13.8V	CH1:27.6V	CH2:27.6V
	Output Voltage Tolerance	±1%		±1%
	Rated output current	3.5A	1A(charge)	1.5A	0.7A(charge)
	Output Current Range	0~4.5A		0~2.2A
	Output power	60W		60W
	Ripple and Noise	150mVp-p	-----	200mVp-p	-----
	DC voltage adjustable range	CH1:11.3~14.9V		CH1:21.3~29.8V
	Start-up, rise and hold times	600ms,50ms,80ms/230VAC.1200ms,50ms,16ms/115VAC.
Input	Input Voltage Range	90~264VAC or 135~370VDC
	AC Input Current	1.8A/115VAC 0.9A/23OVAC
	Efficiency	86%		88%
	Inrush current	Cold-start current 25A/115VAC 40A/230VAC
	Leakage current	<1mA/240VAC
Protective properties	Overload protection	Overload protection activated at 105%~115% of rated output power
		Protection Mode: AC Charging Mode: Spacing Mode, automatic recovery after removal of abnormal load conditions.
	Battery Low Voltage Protection	9.5~10.3V		19~20.5V
		Protection mode: cut-off output

Functionality	UPS function introduction	Long-term on-line float charging of the battery, high charging efficiency, the battery fullness can be as high as 97% or more.
		Self-stopping when full, preventing overcharging and prolonging the life of the battery.
		Automatic switching between mains/battery, no switching time, no need to be manned.
		Cold start function, in the absence of the state of the utility, you can directly use the battery to start the UPS, to meet the emergency needs of users.
Environments	Operating temperature, humidity	-20℃~+60℃;20%~90%RH
	Storage temperature, humidity	-20℃~+85℃;10%~95%RH non-condensing
	Seismic defences	10~500Hz, 2G 10min./1 cycle, 60 minutes, each axis
Surety	Pressure resistance	Between input and output:1.5KVAC Input and ground:1.5KVAC Output and ground:0.5KVDC
	Electrical insulation resistance	Between input and output: input and ground, output and ground: 100M Ohms/500VDC
Standards-compliant	Safety standard	Complies with UL60950-1
	EMC standard	Conforms to EN55022, CLASS A.
Other	Size	129*97*30mm(L*W*H)
	Packaging	0.38kg/50pcs/21kg/0.041m³
Note	1. All parameters are measured at 230VAC input, rated load and 25°C unless otherwise specified.
	2. Ripple and noise voltages were measured on a 20MHz bandwidth oscilloscope with a 12-inch twisted-pair cable terminated with 0.1μ and 47μ capacitors.
	3. Tolerance is the sum of voltage setting error, voltage adjustment rate and current adjustment rate.

Company Profile

Exhibition Show

Packaging & Shipping

FAQ

1. How do you control the quality?
Aging test for 3 hours, after then we put them into the market.

2. Can you accept samples customized? 
No problem for samples order, and welcome your testing before your big order. 

3. What about the production capacity?
 4 days for samples order under 100pcs, 7-15 days for general order under 10000pcs.

 4. OEM and ODM are available?
Yes, we accept customized products 

5. Will the delivery time be long for a big order?
No, we have two special parts in production line, one for samples orders, another for big orders, so we can control the delivery time as we promise in the contract. 

6. What is our warranty service?
For all products we sell have 2 year warranty.